PU管系列 （酯類，軟酯類，醚類，阻燃，抗靜電，抗UV）
PU HOSE series (ester,flexible ester,ether,Flame retardant,anti-static,UV resistant)
技術參數 Technical date | ||||||
系列代碼 series | PU | PU-S | PU-M | PU-FR | PU-AS | PU-UV |
材料 material | 酯類 polyurethane | 軟酯類 polyurethane | 醚類 polyamine ether | 阻燃 Flame retardant | 抗靜電 Anti-Static | 抗UV UV Resistant |
工作介質 Fluid | 空氣 AIR | 空氣 AIR | 空氣、水 Air、water | 空氣 AIR | 空氣 AIR | 空氣 AIR |
工作壓力范圍 maximum operating pressure | 0 - 10 bar | 0 - 8 bar | 0 - 8 bar | 0 - 8 bar | 0 - 8 bar | 0 - 8 bar |
執行標準 Execution standard | ROHS | ROHS | 耐水解，抗菌防霉resistant hydrolysis, antibiosis ,mould proof | UL-94 標準 V-0 | 109 - 1012 Ω | 四級 Level four |
工作溫度 operating temperanture | -20 to 70℃
| |||||
注：上述表中相當高工作壓力數值是指在20 - 25℃，65%（RH）相對濕度條件下的數值，當在其他溫度條件下使用時，請根據工作壓力判斷，溫度越高承受的壓力值越低（溫度是包管內流通的介質和管外環境的溫度）。
訂購編碼/ ORDER ITEM NO:
示例/FOR EXAMPLE: PU-FR0850-100M 聚氨酯阻燃管 外徑8mm*內徑5mm 100米 /PU FLAME RETARDANT HOSE
|
|
| Meter/roll | Burst pressure | Burst pressure | Burst PSI | Burst PSI | |
PU0320-200M | 3 | 2 | 200 | 34 | 19 | 435 | 270 | |
PU0425-200M | 4 | 2.5 | 200 | 38 | 21 | 492 | 305 | |
PU0530-200M | 5 | 3 | 200 | 37 | 21 | 480 | 297 | |
PU0640-200M | 6 | 4 | 200 | 31 | 17 | 401 | 251 | |
PU0840-100M | 8 | 4 | 100 | 48 | 25 | 633 | 363 | |
PU0850-100M | 8 | 5 | 100 | 32 | 19 | 414 | 268 | |
PU0855-100M | 8 | 5.5 | 100 | 28 | 16 | 365 | 219 | |
PU0860-100M | 8 | 6 | 100 | 21 | 11 | 295 | 162 | |
PU1065-100M | 10 | 6.5 | 100 | 31 | 18 | 392 | 286 | |
PI1075-100M | 10 | 7.5 | 100 | 26 | 15 | 335 | 216 | |
PU1280-100M | 12 | 8 | 100 | 31 | 17 | 405 | 248 | |
PU1295-100M | 12 | 9.5 | 100 | 24 | 14 | 313 | 203 | |
PU1410-100M | 14 | 10 | 100 | 20 | 11 | 255 | 159 | |
PU1612-100M | 16 | 12 | 100 | 17 | 10 | 216 | 135 | |
PU1611-100M | 16 | 11 | 100 | 24 | 14 | 315 | 205 | |
PU1/8”-200M | 1/8" | 0.066" | 200 | 43 | 24 | 585 | 355 | |
PU3/16”-200M | 3/16" | 0.188" | 200 | 35 | 19 | 455 | 275 | |
PU1/4”-200M | 1/4" | 0.17" | 200 | 34 | 15 | 435 | 210 | |
PU3/8”-100M | 3/8" | 1/4" | 100 | 31 | 17 | 408 | 252 | |
PU1/2”-100M | 1/2" | 0.32" | 100 | 34 | 17 | 438 | 242 | |
靜態水爆破壓力測試75°F&140°F BURST TEST.HYDROSTATIC WATER PRESSURE75°F&140°F
Note:（爆破壓力與長時間工作壓力安全系數比例:3:1） Safety Factor between BP and WP:3:1 PERFORMANCE DATA(性能數據）:
1)氣體溫度范圍：-40 ℃ ~ +80 ℃ （非化學氣體空間）
液體溫度范圍：-15 ℃ ~ +60 ℃ （無結冰條件下）
Temperature and the working environment (temperature): -40 ℃ ~ +80 ℃ (non-chemical gas space)
Fluid temperature range: -15 ℃ ~ +60 ℃ (not ice over)
2)公差范圍：± 0.1mm ~ ± 0.15mm Diameter tolerance: ± 0.1mm ~ ± 0.15mm
3) 硬度：邵氏95A / 98A （根據不同的季節和區域來選擇）
Hardness: Shores 95A / 98A (according to season and region)
4) 抗張力強度：400kgf/cm2 (5690 PSI) Tensile strength: 400kgf/cm2 (5690 P
5)抗張力強度：400kgf/cm2 (5690 PSI) Elongation limit: 490-590%
6)耐磨損度：35mg Resistant to wear and tear of: 35mg
7)撕裂強度：110kg/cm2 (1565 PSI) Tear strength: 110kg/cm2 (1565 PSI)
8) 爆破壓力與長時間工作壓力安全系數比例為：3:1 Blasting pressure and the pressure to work long hours for the safety factor ratio: 3:1
9)相當小彎曲半徑 Minimum bending angle:
3 * 2-12 ℃ ；4 * 2.5-12 ℃ ；5 * 3-33 ℃ ；6 * 4-35 ℃ ；8 * 5-39 ℃ ；8 * 5.5-46 ℃ ；10 * 6.5-43.5 ℃ ；10 * 7.5-42 ℃ ；12 * 8-37 ℃； 12 * 9.5-54 ℃ ；14 * 10-70 ℃ ；16 * 12-70 ℃。
SUPERIOR FEATURES（優良特性）:
? excellent flexibility. 極好的柔韌性。
? bend radius less resistance around the song. 彎曲半徑小，耐繞曲。
? high elastic recovery memory effect. 高彈性，回復記憶效應。
? resistant to wear and tear, impact. 耐磨損，撕裂，撞擊。
? part of the resistance can not corrosive chemicals and oils. 可抵抗部分無腐蝕性化學物及油類。
? Resits fuels and can be spliced. 可流通易燃性物體，能熔接。
? 100% incineration. approved by scientific Eoology Group.
能100%焚化成灰，是認可的環保產物。
